Bộ nguồn TRIO-UPS-2G/1AC/1AC/230V/750VA
đại lý TRIO-UPS-2G/1AC/1AC/230V/750VA
nhà phân phối TRIO-UPS-2G/1AC/1AC/230V/750VA
▲
Thông số kỹ thuật bộ nguồn Phoenix Contact
| Mã đặt hàng | 2905909 |
|---|---|
| Đơn vị đóng gói | 1 pc |
| Catalog page | Page 282 (C-4-2017) |
| GTIN | 4055626007502 |
| Trọng lượng mỗi mảnh (không bao gồm đóng gói) | 6,155.600 g |
| Mã HS | 85044030 |
| Xuất xứ | DE (Germany) |
Kích thước
| Chiều rộng | 210 mm |
|---|---|
| Chiều cao | 170 mm |
| Độ sâu | 136 mm |
Điều kiện môi trường xung quanh
| Nhiệt độ môi trường (vận hành) | 0 °C … 40 °C |
|---|---|
| Nhiệt độ môi trường (bảo quản/vận chuyển) | -15 °C … 40 °C (with charged energy storage device) |
| Độ ẩm lớn nhất cho phép (vận hành) | ≤ 95 % (25 °C, non-condensing) |
| Maximum altitude | ≤ 3000 mm (> 2000 m, observe derating) |
| Vibration (operation) | 5 Hz … 100 Hz, 0.7g (EN 60068-2-6) |
| Shock | 20g in all directions (EN 60068-2-27) |
| 30g in each space direction with UWA 130 | |
| Mức độ ô nhiễm | 2 |
| Khí hậu | 3K3 (in acc. with EN 60721) |
Dữ liệu đầu vào
| Nominal input voltage | 230 V AC |
|---|---|
| Dải điện áp đầu vào | 184 V AC … 264 V AC |
| Frequency range | 45 Hz … 55 Hz |
| Mức tiêu thụ hiện tại | 3 A |
| Permissible backup fuse | B6 B10 B16 |
Dữ liệu kết nối, đầu vào
| Phương thức kết nối | Push-in connection |
|---|---|
| Tiết diện dây dẫn rắn tối thiểu. | 0.2 mm² |
| Tiết diện dây dẫn rắn tối đa. | 4 mm² |
| Tiết diện dây dẫn linh hoạt tối thiểu. | 0.2 mm² |
| Tiết diện dây dẫn linh hoạt tối đa. | 2.5 mm² |
| Tiết diện dây dẫn AWG tối thiểu. | 24 |
| Tiết diện dây dẫn tối đa AWG. | 12 |
| Chiều dài | 10 mm |
Dữ liệu đầu ra
| Apparent power | 750 VA |
|---|---|
| Rated Power (Real Power) | 600 W |
| Power factor (cos phi) | 0.8 |
| Crest factor | 2.8 |
| Switch-over time | < 10 ms |
| Classification according to IEC 62040-3 | VFD-SS-311 |
Dữ liệu đầu ra (mains operation)
| Điện áp đầu ra danh nghĩa (UN) | 230 V AC |
|---|---|
| Dòng điện đầu ra danh nghĩa (IN) | 3 A (750 VA) |
Dữ liệu đầu ra (battery operation)
| Điện áp đầu ra danh nghĩa (UN) | 230 V AC |
|---|---|
| Dòng điện đầu ra danh nghĩa (IN) | 3 A (750 VA) |
| Form of output voltage | Pure sine |
| Frequency (after automatic detection in mains operation) | 50 Hz |
| 60 Hz |
Dữ liệu kết nối, đầu ra
| Phương thức kết nối | Push-in connection |
|---|---|
| Tiết diện dây dẫn rắn tối thiểu. | 0.2 mm² |
| Tiết diện dây dẫn rắn tối đa. | 4 mm² |
| Tiết diện dây dẫn linh hoạt tối thiểu. | 0.2 mm² |
| Tiết diện dây dẫn linh hoạt tối đa. | 2.5 mm² |
| Tiết diện dây dẫn AWG tối thiểu. | 24 |
| Tiết diện dây dẫn tối đa AWG. | 12 |
| Chiều dài | 10 mm |
Tổng quan data
| Hiệu suất | > 95 % (with charged energy storage device) |
|---|---|
| MTBF (IEC 61709, SN 29500) | > 206000 h (40°C) |
| Cấp bảo vệ | IP20 |
| Cấp bảo vệ | I |
| Type of housing | Steel sheet, zinc-plated |
| Hood version | PC + ABS |
| Cầu chì đầu vào | 10 A 400 V gRL |
| Weight | 5.7 kg |
Energy storage
| Battery technology | Lead rechargeable battery module |
|---|---|
| Battery type | 2x Panasonic UP-VW1220P1 |
| Capacity | 3.4 Ah |
| Battery fuse | 40 A, 32 V |
| Charging time | 7 h |
| Service life | 6 Years … 9 Years (20 °C) |
| Latest startup | 6 Months (0 °C … 20 °C) |
| Buffer period | 20 min. (100 W) |
| 4 min. (300 W) | |
| 1 min. (600 W) | |
| Can be extended with external battery | 1x 24 V 3.4 Ah |
Connection data for the external battery
| Phương thức kết nối | Push-in connection |
|---|---|
| Tiết diện dây dẫn rắn tối thiểu. | 0.2 mm² |
| Tiết diện dây dẫn rắn tối đa. | 10 mm² |
| Tiết diện dây dẫn linh hoạt tối thiểu. | 0.2 mm² |
| Tiết diện dây dẫn linh hoạt tối đa. | 6 mm² |
| Tiết diện dây dẫn AWG tối thiểu. | 24 |
| Tiết diện dây dẫn tối đa AWG. | 8 |
| Chiều dài | 15 mm |
Status and diagnostics indicator / signal outputs – Alarm
| Switching output | Transistor output, active |
|---|---|
| Output voltage | 24 V (SELV) |
| Continuous load current | ≤ 20 mA |
| Status display | LED red |
Status and diagnostics indicator / signal outputs – Battery Mode
| Switching output | Transistor output, active |
|---|---|
| Output voltage | 24 V (SELV) |
| Continuous load current | ≤ 20 mA |
| Status display | Yellow LED |
Status and diagnostics indicator / signal outputs – Ready
| Switching output | Transistor output, active |
|---|---|
| Output voltage | 24 V (SELV) |
| Continuous load current | ≤ 20 mA |
Status and diagnostics indicator / signal outputs – Battery Charge
| Status display | Yellow LED |
|---|
Status and diagnostics indicator / signal outputs – AC OK, P>Pn, Remote
| Status display | Green LED |
|---|
Status and diagnostics indicator /signal outputs – Service
| Status display | LED red |
|---|
Dữ liệu kết nối để báo hiệu
| Phương thức kết nối | Push-in connection |
|---|---|
| Tiết diện dây dẫn rắn tối thiểu. | 0.2 mm² |
| Tiết diện dây dẫn rắn tối đa. | 1.5 mm² |
| Tiết diện dây dẫn linh hoạt tối thiểu. | 0.2 mm² |
| Tiết diện dây dẫn linh hoạt tối đa. | 1.5 mm² |
| Tiết diện dây dẫn AWG tối thiểu. | 24 |
| Tiết diện dây dẫn tối đa AWG. | 16 |
| Chiều dài | 8 mm |
Remote control
| Designation | Remote |
|---|---|
| Low signal | Connection to SGnd with < 2.7 kΩ |
| High signal | Open (> 35 kΩ between remote and SGnd) |
Battery-operated start (bat. start)
| Low signal | Connection to SGnd with < 2.7 kΩ |
|---|---|
| High signal | Open (> 200 kΩ between bat. start and SGnd) |
Interfaces
| Interface | MINI-USB type B |
|---|
Device combinations
| UPS connection in parallel | no |
|---|---|
| UPS connection in series | no |
Tiêu chuẩn và Quy định
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
|---|---|
| Noise immunity | Noise immunity according to EN 62040-2-2006 |
| Standards/regulations | EN 61000-4-2 |
| Contact discharge | 4 kV (Test Level 2) |
| Standards/regulations | EN 61000-4-3 |
| Frequency range | 80 MHz … 1 GHz |
| Test field strength | 10 V/m |
| Standards/regulations | EN 61000-4-4 |
| Comments | Criterion B |
| Standards/regulations | EN 61000-4-6 |
| Frequency range | 0.15 MHz … 80 MHz |
| Voltage | 10 V |
| Conducted noise emission | EN 55016 EN 62040-02 (Class C2) |
| Standards/regulations | EN 61000-4-8 |
| Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
| Shock | 20g in all directions (EN 60068-2-27) |
| Vibration (operation) | 5 Hz … 100 Hz, 0.7g (EN 60068-2-6) |
Sản phẩm tuân thủ môi trường
| Environmentally Friendly Use Period = 3 | |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration” |
[email protected] [email protected] [email protected] [email protected] [email protected] 9.027040705
ETIM 5.0EC000382ETIM 6.0EC000382
13.239121011



