Mô đun đầu cuối KL2542 | Bus Terminal, 2-channel motion interface, DC motor, 48 V DC, 3.5 A
| Thông số kỹ thuật Bus Terminal Beckhoff | KL2542 |
|---|---|
| Số đầu ra | 2 |
| Rated load voltage | 8…48 V DC |
| Load type | DC brush motor, inductive |
| Max. output current | 2 x 3.5 A (short-circuit proof, thermal-overload proof) for both channels together |
| PWM clock frequency | 35 kHz with 180° phase shift each |
| Duty factor | 0…100 % (voltage-controlled) |
| Resolution | max. 12 bit current, 16 bit speed |
| Cách ly điện | 500 V (K-bus/field potential) |
| Tiêu thụ hiện tại K-bus | typ. 100 mA |
| Current consumption sensor supply | typ. 20 mA |
| Độ rộng bit trong hình ảnh quá trình | 48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status |
| Cấu hình | adaptation and optimisation of the respective motor via the controller and registers or KS2000 configuration software |
| Cân nặng | approx. 100 g |
| Nhiệt độ vận hành/bảo quản | 0…+55 °C/-25…+85 °C |
| Độ ẩm tương đối | 95 %, no condensation |
| Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
| Miễn nhiễm/phát xạ EMC | conforms to EN 61000-6-2/EN 61000-6-4 |
| Bảo vệ. vị trí đánh giá/cài đặt. | IP20/variable |
| Cắm dây | for all KSxxxx Bus Terminals |
| Phê duyệt/đánh dấu | CE |
đại lý KL2542
nhà phân phối KL2542
đại lý Beckhoff KL2542
| Housing data | KL-24-2x8pin | KS-24-2x8pin |
|---|---|---|
| Mẫu thiết kế | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Vật liệu | polycarbonate | |
| Kích thước (W x H x D) | 24 mm x 100 mm x 68 mm | |
| Lắp đặt | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Gắn cạnh nhau bằng phương tiện | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Dây dẫn | solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver | |
| Mặt cắt kết nối | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Mặt cắt kết nối AWG | s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 |
s*: AWG 28…16, st*: AWG 28…16, f*: AWG 26…16 |
| Chiều dài | 8…9 mm | |
| Dòng điện tải power contacts | Imax: 10 A | |
| Thông tin đặt hàng | |
|---|---|
| KL2542 | Bus Terminal, 2-channel motion interface, DC motor, 48 V DC, 3.5 A |
| KS2542 | Bus Terminal, 2-channel motion interface, DC motor, 48 V DC, 3.5 A, pluggable wiring |



